Four decades of glacier mass balance observations in the Indian Himalaya

Understanding the glacier mass balance is necessary to explain the rate of shrinkage and to infer the impact of climate change. The present study provides an overview of the glacier mass balance records by glaciological, geodetic, hydrological and accumulation-area ratio (AAR) and specific mass balance relationship methods in the Indian Himalaya since 1970s. It suggests that the mass balance measurements by glaciological methods have been conducted for ten glaciers in the western Himalaya, four glaciers in the central Himalaya and one in the eastern Himalaya. Hydrological mass balance has been conducted only on Siachen Glacier from 1987 to 1991. Geodetic method has been attempted for the Lahaul–Spiti region for a short time span during 1999–2011 and Hindu Kush–Karakoram–Himalaya region from 2003 to 2008. We compared in situ specific balance data series with specific mass balance derived from AAR and specific mass balance relationship. The results derived from existing and newly presented regression model based on AAR and specific mass balance relationship induced unrealistic specific mass balance for several glaciers. We also revised AAR0 and ELA0 based on available in situ AAR and specific mass balance data series of Indian Himalayan glaciers. In general, in situ specific and cumulative specific mass balance observed over different regions of the Indian Himalayan glaciers shows mostly negative mass balance years with a few positive ones during 1974–2012. On a regional level, the geodetic studies suggest that on the whole western, the central and the eastern Himalaya experienced vast thinning during the last decade (2000s). Conversely, Karakoram region showed slight mass gain during almost similar period. However, the glaciological, hydrological and geodetic mass balance data appear to exhibit short time series bias. We therefore recommend creation of benchmark glaciers network for future research to determine the impact of climate change on the Himalayan cryosphere.     

Male exposure mediated adverse reproductive outcomes in carbon disulphide exposed rayon workers

The authors examined 100 carbon disulphide (CS2) exposed male workers who had been employed ten years prior to study were selected for the study. They were virtually obliged to participate in the study by the Medical Labor Inspector and all of them participated voluntary. The aim was to assess the effects of occupational exposure to carbon disulphide concentrations below the threshold limit value (31 mg/m3) on the reproductive functions with special emphasis on miscarriages. Specially, workers history records were build up on number of children, miscarriages and general weakness, mental fatigue etc. It was found that the incidences of number of miscarriages against number of living children correlated well with environmental concentration of CS2. Where the average CS2 levels were 1.695 ppm, the incidences of miscarriages was 5.71% (group 1). Where as in group 2 environmental concentrations were 12.28 ppm and the incidences of miscarriages were 18.91%. It was also found that in the spinning department the exposure exceeds many times the Threshold Limit Values (TL V).     

Biomass and carbon budgeting of sustainable agroforestry systems as ecosystem service in Indian Himalayas

Adoption of agroforestry is paramount as a climate change mitigation and adaptation strategy. The assessment of plant biomass is crucial for understanding the vulnerability of biological systems to climate change. In the present study, agroforestry systems viz., agrisilviculture (AS), agrihorticulture (AH), agrihortisilviculture (AHS) and agrisilvihorticulture (ASH) were investigated for biomass production and carbon stock in vegetation as well as in soil in the Indian central Himalaya along the elevation i.e. E₁ (<1100 m), E₂ (1100–1400 m), E₃ (1400–1700 m), E₄ (1700–2000 m) and E₅ (>2000 m). Mean aboveground and belowground biomass were 73.9% and 26.1%, respectively, of total biomass (64.4 t ha^?1) in agroforestry systems. Fodder and/or timber trees accounted for 31% (in AHS) to 74% (in AS) of total biomass, while fruit trees accounted for 18% (in ASH) to 73% (in AH) of total biomass. The contribution of agriculture crops to total biomass fluctuated between 19% (in ASH) and 26% (in AH). Total vegetation biomass, soil carbon and total carbon density in agroforestry systems increased significantly along the elevation, with maximum biomass at elevation E₅ (32.0 t ha^?1, 64.7 t C ha^?1 and 96.7 t C ha^?1). Total biomass of vegetation among agroforestry systems differed significantly. Soil carbon stock was highest in AHS (59.5 t C ha^?1) and total carbon density (vegetation + soil) was highest in ASH (93.0 t C ha^?1). Thus, in Indian Himalayas, vegetation biomass, carbon stock, soil and total carbon (vegetation + soil) stock increased along the elevation.

Abbrviations: AG: aboveground; BG: belowground; WD: wood density; VOB: volume over bark; BEF: biomass expansion factor; AS: agrisilviculture; AH: agrihorticulture; ASH: agrisilvihorticulture; AHS: agrihortisilviculture; E: elevation; C: carbon; CO₂: carbon-di-oxide; IPCC: Intergovernmental Panel on Climate Change; DBH: diameter at breast height; AGBD: aboveground biomass density; BGBD: belowground biomass density; GSVD: growing stock volume density     

Carcinogenic and co-carcinogenic potential of 2,3,7,8-tetrachlorodibenzo-p-dioxin in a host-mediated in vivo/in vitro assay

In an in vivo/in vitro assay system (Massa et al., 1990) we have detected the carcinogenic activity of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). The carcinogenic potential measured in this system is concentration-dependent. Experiments with other carcinogenic compounds have revealed that TCDD at low doses can act as co-carcinogen. At higher concentrations TCDD induces TNF-α production.     

Halopriming imparts tolerance to salt and PEG induced drought stress in sugarcane

Sugarcane, a glycophyte grown in the tropical and subtropical regions, is frequently subjected to soil salinity, affecting the yield and quality of the harvest. The ameliorative efficiency of salt priming on emergence and plantlet growth was examined in sugarcane cultivars which are known to vary in salt tolerance under field conditions. Salt priming with NaCl (100 mM) improved both the percent and rate of germination of the sets of the tolerant (Co 62175) and moderately tolerant (CoM 265) varieties compared to sensitive (CoC 671) and test variety (Co 86032). Salt priming during germination also improved the growth performance of two-month-old sugarcane plants in terms of shoot length, shoot and root fresh weight when subjected to 15 day iso-osmotic (−0.7 MPa) NaCl (150 mM) or polyethylene glycol (PEG 8000; 20%, w/v) stress. The primed plants exhibited lower salt- and dehydration-induced leaf senescence. The results suggest salt priming as an efficient approach for imparting abiotic stress tolerance in sugarcane.     

Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

Use of artificial roughness for performance enhancement of solar air heaters—a review

The performance characteristics of a solar air heater can effectively be improved by providing artificial roughness in the form of protrusions and dimples of various shapes, sizes, and orientations on the underside of heated surface. An extensive literature review on artificial roughness elements has been carried and the correlations developed for heat transfer and friction factor for roughened solar air collector have been discussed and presented in this paper. The performance parameter has also been computed and compared with various kinds and shapes of roughness geometries using correlations developed by various investigators. The optimum values of the roughness parameters obtained by several investigators have also been discussed.     

Identification and elucidation of anthropogenic source contribution in PM10 pollutant: Insight gain from dispersion and receptor models

Source apportionment study of PM₁₀ (Particulate Matter) in a critically polluted area of Jharia coalfield, India has been carried out using Dispersion model, Principle Component Analysis (PCA) and Chemical Mass Balance (CMB) techniques. Dispersion model Atmospheric Dispersion Model (AERMOD) was introduced to simplify the complexity of sources in Jharia coalfield. PCA and CMB analysis indicates that monitoring stations near the mining area were mainly affected by the emission from open coal mining and its associated activities such as coal transportation, loading and unloading of coal. Mine fire emission also contributed a considerable amount of particulate matters in monitoring stations. Locations in the city area were mostly affected by vehicular, Liquid Petroleum Gas (LPG) & Diesel Generator (DG) set emissions, residential, and commercial activities. The experimental data sampling and their analysis could aid understanding how dispersion based model technique along with receptor model based concept can be strategically used for quantitative analysis of Natural and Anthropogenic sources of PM₁₀.     

Uranium quantification in groundwater and health risk from its ingestion in Haryana,India

Uranium is a naturally occurring radioactive element which may cause toxicological or radiological hazards to the public if present in drinking water. This study reports the quantification of uranium in groundwater of major towns of the district Fatehabad, Haryana, India. Uranium concentrations ranged between 0.3 and 48 μg L^?1. In 22% of the groundwater samples, uranium concentrations were higher than the World Health Organization maximum permissible limit of 30 µg L^?1. The radiological dose for males was found to be in the range of 4.8?×?10^?4–7.1?×?10^?2 mSv y^?1 and for females 3.5?×?10^?4–5.2?×?10^?2 mSv y^?1. The results showed that due to the ingestion of groundwater in the study area, radiological cancer risk is in the range of 9.1?×?10^?7–1.3?×?10^?4, lower than the risk limit. Uranium ingestion from groundwater varied from 0.02 to 3.5 µg kg^?1 day^?1, which is within acceptable limit.     

Medicinal plants: Potential for economic development in the state of Uttaranchal,India

The present study deals with the medicinal plant wealth of Uttaranchal state in northern India. A total of 964 medicinal plant species were documented with the help of a literature survey and fieldwork undertaken in the various parts of the state. These medicinal plants were used in curing 135 ailments, with the highest numbers of species being used for treatment of cuts and wounds, followed by fever and diarrhoea. Among the various life forms, herbs were dominant (64%), followed by 20% shrubs and 16% tree species. Taxonomically, Asteraceae was the dominant family, having 87 species of medicinal plants, followed by Fabaceae (58 species), Lamiaceae (49 species), Rosaceae (30 species), Liliaceae (29 species), Apiaceae (28 species), Euphorbiaceae (26 species), Ranunculaceae (26 species) and Orchidaceae (23 species). Such a rich resource base indicates the huge potential for economic development of the state through herb-based industries.